EA‑PS 10200‑50 2U | 200V 50A 3000W Auto‑Ranging 19" 2U Rack‑Mount Programmable DC Power Supply

The EA‑PS 10200‑50 2U belongs to EA‑PS 10000 2U series from German EA Elektro‑Automatik, distributed by TPS. It acts as high‑performance alternative to ametek/amtek programmable power supplies. Widely deployed for industrial test‑system power, battery charging cycles, electronic‑load pairing validation, precision voltage‑&‑current source applications, laboratory R&D and 24V DUT performance verification.

Core Specifications: DC output range 0‑200V, 0‑50A, rated 3000W (derates to 1500W under 110‑127V AC mains), peak efficiency up to 94.5%. CV ripple:30 mV rms (300 kHz BW), 300 mV pp (20 MHz BW). Measurement accuracy: voltage ≤0.05% FS, current ≤0.1% FS, power ≤0.3% FS. Supports CV / CC / CP / CR four regulation modes, resistance adjustment range:0.1 Ω‑250 Ω, output capacity 1600 μF. Galvanically‑isolated analog interface supports selectable 0‑5V / 0‑10V remote programming. Wide‑range 90‑264V single‑phase AC input with active PFC, compact 19‑inch 2U rack housing, temperature‑controlled front‑to‑rear forced‑air cooling.

Key Features

• EA‑PS 10200‑50 2U, 200V 50A 3000W auto‑ranging programmable DC power supply, PN:06230948
• 19‑inch 2U rack‑mount enclosure, dimension 482.6×88.4×559mm, weight approx.12.7kg
• Active PFC(PF＞0.99), true voltage‑current‑power auto‑ranging to deliver full‑power within broad operating envelope
• Four regulation modes: Constant Voltage(CV), Constant Current(CC), Constant Power(CP), Constant Resistance(CR) for battery‑emulation test scenarios
• 5‑inch capacitive Gorilla‑Glass TFT touch‑screen HMI, dual push‑rotary knobs; front‑panel USB‑Host for CSV data logging, save / load user test profiles
• Selectable 0‑5 V / 0‑10 V galvanically‑isolated analog remote control for set‑value programming and status monitoring
• Comprehensive multi‑level safety protections: OVP, OCP, OPP, OT, Power‑Fail, Share‑Bus‑Fail with automatic DC‑output shutdown upon alarm trigger
• Remote‑sense terminals for DC cable IR‑drop compensation; rear USB‑B & Ethernet built‑in digital communication ports
• Master‑Slave / Share‑Bus parallel‑operation support, expandable up to 64 compatible‑series units for scalable high‑power combined test systems
• SCPI / ModBus RTU protocol compliant, EA Power Control software and LabView driver available; optional IF‑AB plug‑in modules: CANopen, ProfiNet, EtherCAT, RS232, ModBus‑TCP etc.
• Complies with EN 61010‑1 safety standard, IP20 ingress rating; supports SEMI F47 voltage‑sag compliance for semiconductor‑grade test environments.