EA‑PS 10080‑60 2U | 80V 60A 1500W True Auto‑Ranging 19" 2U Rack‑Mount Programmable DC Power Supply

The EA‑PS 10080‑60 2U belongs to German EA Elektro‑Automatik EA‑PS 10000 2U series, distributed by TPS. It serves as a high‑quality alternative to ametek/amtek programmable power supplies. Designed for medium‑volume production test, laboratory R&D and industrial ATE systems. It features voltage‑current‑power autoranging and supports 0‑5V / 0‑10V analog control, ideal for 24V device validation, low‑voltage high‑current component and battery testing.

Core Specifications: DC output range 0‑80V, 0‑60A, rated 1500W (derates to 1200W under 110‑127V AC mains), peak efficiency up to 94%. CV ripple:10 mV rms (300 kHz BW), 100 mV pp (20 MHz BW). Measurement accuracy: voltage ≤0.05% FS, current ≤0.1% FS, power ≤0.3% FS. CV/CC/CP/CR four operating modes, resistance adjustment range:0.04 Ω‑80 Ω, output capacity 8640 μF. Analog interface selectable for 0‑5V or 0‑10V remote control. Wide‑range 90‑264V single‑phase AC input with active PFC, temperature‑controlled front‑to‑rear forced‑air cooling in compact 19‑inch 2U rack form‑factor.

Key Features

• EA‑PS 10080‑60 2U, 80V 60A 1500W autoranging programmable DC power supply, PN:06230941
• 19‑inch 2U rack‑mount enclosure, dimension 482.6×88.4×559mm, weight approx.9.5kg
• Active PFC(PF＞0.99), true voltage/current/power auto‑ranging to maintain full‑power across wide operating envelope
• Four regulation modes: Constant Voltage(CV), Constant Current(CC), Constant Power(CP), Constant Resistance(CR) for battery emulation test scenarios
• 5‑inch capacitive Gorilla‑Glass TFT touch‑screen HMI, dual push‑rotary knobs; front‑panel USB‑Host for CSV logging, save / load user test profiles
• Selectable 0‑5 V / 0‑10 V galvanically‑isolated analog remote control for set‑value programming and status monitoring
• Comprehensive multi‑level safety protections: OVP, Safety‑OVP, OCP, OPP, OT, Power‑Fail, Share‑Bus‑Fail with automatic DC‑output shutdown on alarm condition
• Remote‑sense terminals for DC cable IR‑drop compensation; rear USB‑B & Ethernet built‑in digital communication ports
• Master‑Slave / Share‑Bus parallel‑operation support, expandable up to 64 compatible‑series units for scalable high‑power test systems
• SCPI / ModBus RTU protocol compliant, EA Power Control software and LabView driver available; optional IF‑AB plug‑in modules: CANopen, ProfiNet, EtherCAT, RS232, ModBus‑TCP etc.
• Complies with EN 61010‑1 safety standard, IP20 ingress rating; supports SEMI F47 voltage‑sag compliance for semiconductor‑related test environments.