EA‑PS 10060‑60 2U | 60V 60A 1500W High‑Current Auto‑Ranging 19" 2U Rack‑Mount Programmable DC Power Supply

The EA‑PS 10060‑60 2U is part of EA‑PS 10000 2U series manufactured by German EA Elektro‑Automatik, distributed by TPS. It is a precision digital touch‑screen programmable DC power source serving as alternative to ametek/amtek test instruments. Optimized for laboratory R&D, industrial ATE systems, high‑current battery charging, 24V power‑supply validation, DC‑motor and low‑voltage power‑component characterization.

Core Specifications: DC output 0‑60V, 0‑60A, rated 1500W (derates to 1200W under 110‑127V AC mains), peak efficiency up to 94%. CV ripple:10 mV rms (300 kHz BW), 100 mV pp (20 MHz BW). Measurement accuracy: voltage ≤0.05% FS, current ≤0.1% FS, power ≤0.3% FS. Supports CV / CC / CP / CR four regulation modes, resistance adjustment range:0.04 Ω‑80 Ω, output capacity 8640 μF. Universal 90‑264V single‑phase AC input with active PFC, compact 19‑inch 2U rack chassis, temperature‑controlled front‑to‑rear forced‑air cooling.

Key Features

• EA‑PS 10060‑60 2U, 60V 60A 1500W high‑current programmable DC power supply, PN:06230940
• 19‑inch 2U rack‑mount enclosure, dimension 482.6×88.4×559mm, weight approx.9.5kg
• Active PFC(PF＞0.99), true auto‑ranging U/I/P characteristic for flexible voltage‑current combinations within full‑power envelope
• Four regulation modes: Constant Voltage(CV), Constant Current(CC), Constant Power(CP), Constant Resistance(CR) for battery‑simulation test scenarios
• 5‑inch capacitive Gorilla‑Glass TFT touch‑screen HMI, dual push‑rotary knobs; front‑panel USB‑Host for CSV data logging, save / load user test profiles
• Multi‑layer safety protections: adjustable OVP (including Safety OVP for SELV compliance), OCP, OPP, OT, Power‑Fail, Share‑Bus‑Fail with automatic DC‑output shutdown upon alarm trigger
• Remote‑sense terminals for DC cable IR‑drop compensation; galvanically‑isolated 15‑pin analog, rear USB‑B & Ethernet onboard communication interfaces
• Master‑Slave / Share‑Bus parallel‑operation support, expandable up to 64 compatible‑series units for scalable high‑power combined test systems
• SCPI / ModBus RTU protocol compliant, EA Power Control software and LabView driver available; optional IF‑AB plug‑in modules: CANopen, ProfiNet, EtherCAT, RS232, ModBus‑TCP etc.
• Complies with EN 61010‑1 safety standard, IP20 ingress rating; supports SEMI F47 voltage‑sag feature for semiconductor‑grade test environments.