EA‑PSB 10080‑60 2U | 80V 60A 1500W Auto‑Ranging Bidirectional Regenerative 19" 2U Rack‑Mount Programmable DC Power Supply

The EA‑PSB 10080‑60 2U is part of EA‑PSB 10000 2U bidirectional series from German EA Elektro‑Automatik, distributed by TPS. It serves as high‑performance alternative to ametek/amtek programmable power supplies. This two‑quadrant autoranging unit integrates precision DC source and regenerative electronic sink load, supporting selectable 0‑5V / 0‑10V analogue remote control. Featuring seamless source‑sink transition, well‑suited for laboratory R&D, medium‑volume production test benches, battery charge‑discharge cycling, 24V DUT validation and low‑voltage power‑component characterization.

Core Specifications: DC output range 0‑80V, 0‑60A, rated ±1500W (derates to ±1200W under 110‑127V AC mains), max sink/source efficiency up to 94%. CV ripple:10 mV rms (300 kHz BW), 100 mV pp (20 MHz BW). Measurement accuracy: voltage ≤0.05% FS, current ≤0.1% FS, power ≤0.3% FS. CC‑mode rise / fall time ≤10 ms. Supports CV / CC / CP / CR four regulation modes, resistance adjustment range:0.04 Ω‑80 Ω, output capacity 8640 μF. Galvanically‑isolated analog interface with switchable 0‑5V / 0‑10V remote programming. Universal 90‑264V single‑phase AC input with active PFC, compact 19‑inch 2U rack chassis, temperature‑controlled front‑to‑rear forced‑air cooling.

Key Features

• EA‑PSB 10080‑60 2U, 80V 60A ±1500W auto‑ranging bidirectional regenerative programmable DC power supply, PN:30000721
• 19‑inch 2U rack‑mount enclosure, dimension 482.6×88.4×559mm, weight approx.9.5kg
• Active PFC(PF＞0.99), true voltage‑current‑power auto‑ranging for flexible full‑power operating envelope
• Bidirectional 2‑quadrant operation: seamless automatic source‑sink transition; sink mode recuperates absorbed DC energy back to mains grid with up to 94% efficiency
• Four regulation modes: Constant Voltage(CV), Constant Current(CC), Constant Power(CP), Constant Resistance(CR) for battery‑emulation & electronic‑load‑simulation test scenarios
• 5‑inch capacitive Gorilla‑Glass TFT touch‑screen HMI, dual push‑rotary knobs; front‑panel USB‑Host for CSV data logging, save / load user test profiles & arbitrary waveform sequences
• Switchable galvanically‑isolated analogue control: 0‑5V or 0‑10V for set‑point programming and status monitoring; rear USB‑B and Ethernet digital remote interfaces included
• Integrated multi‑function generator: Sine, Triangle, Rectangle, Trapezoid, DIN40839, Arbitrary, Ramp, XY‑table; built‑in battery test, fuel‑cell simulation and MPPT PV characteristic simulation functions
• Comprehensive multi‑level safety protections: OVP, Safety‑OVP, OCP, OPP, OT, Power‑Fail, Share‑Bus‑Fail with automatic DC‑terminal shutdown upon alarm trigger
• Remote‑sense terminals for DC cable IR‑drop compensation; built‑in Share‑Bus and Master‑Slave bus interfaces for multi‑unit bidirectional power‑system expansion
• Master‑Slave / Share‑Bus parallel‑operation support, expandable up to 64 compatible‑series units for scalable high‑power combined source‑sink test systems
• SCPI / ModBus RTU protocol compliant, EA Power Control software and LabView driver available; optional IF‑AB plug‑in modules: CANopen, ProfiNet, EtherCAT, RS232, ModBus‑TCP etc.
• Complies with EN 61010‑1 safety standard, IP20 ingress rating; supports SEMI F47 voltage‑sag compliance for semiconductor‑grade test environments.