EA‑PS 11500‑06 2U | 1500V 6A 3000W Ultra‑High‑Voltage Auto‑Ranging 19" 2U Rack‑Mount Programmable DC Power Supply

The EA‑PS 11500‑06 2U belongs to EA‑PS 10000 2U series manufactured by German EA Elektro‑Automatik, distributed by TPS. It serves as high‑performance alternative to ametek/amtek test power supplies. This 1500V ultra‑high‑voltage rack‑mount DC source supports master‑slave multi‑unit expansion and multi‑mode remote control. Well‑suited for laboratory R&D, industrial ATE test‑system power, high‑voltage stack battery charging, paired electronic‑load validation, precision CV/CC source applications and 24V DUT performance verification.

Core Specifications: DC output range 0‑1500V, 0‑6A, rated 3000W (derates to 1500W under 110‑127V AC mains), peak efficiency up to 95%. CV ripple:150 mV rms (300 kHz BW), 6500 mV pp (20 MHz BW). Measurement accuracy: voltage ≤0.05% FS, current ≤0.1% FS, power ≤0.3% FS. Supports CV / CC / CP / CR four regulation modes, resistance adjustment range:8 Ω‑6000 Ω, output capacity 20 μF. Negative DC pole to PE isolation ±1500 V DC, positive DC pole to PE +2000 V DC. Galvanically‑isolated analog interface with selectable 0‑5V / 0‑10V remote programming. Wide‑range 90‑264V single‑phase AC input with active PFC, compact 19‑inch 2U rack housing, temperature‑controlled front‑to‑rear forced‑air cooling.

Key Features

• EA‑PS 11500‑06 2U, 1500V 6A 3000W auto‑ranging programmable DC power supply, PN:06230953
• 19‑inch 2U rack‑mount enclosure, dimension 482.6×88.4×559mm, weight approx.12.7kg
• Active PFC(PF＞0.99), true voltage‑current‑power auto‑ranging delivering full‑power across wide operating envelope
• Four regulation modes: Constant Voltage(CV), Constant Current(CC), Constant Power(CP), Constant Resistance(CR) for battery‑emulation test scenarios
• 5‑inch capacitive Gorilla‑Glass TFT touch‑screen HMI, dual push‑rotary knobs; front‑panel USB‑Host for CSV data logging, save / load user test profiles
• Multiple remote‑control options: galvanically‑isolated analog(0‑5V/0‑10V), rear USB‑B and Ethernet for instrument remote programming
• Enhanced high‑voltage insulation: negative DC‑pole ±1500 V DC‑PE, positive DC‑pole +2000 V DC‑PE for safe ultra‑high‑voltage operation
• Comprehensive multi‑level safety protections: OVP, OCP, OPP, OT, Power‑Fail, Share‑Bus‑Fail with automatic DC‑output shutdown upon alarm trigger
• Remote‑sense terminals for DC cable IR‑drop compensation; built‑in Share‑Bus and Master‑Slave bus interfaces for multi‑unit power system expansion
• Master‑Slave / Share‑Bus parallel‑operation support, expandable up to 64 compatible‑series units for scalable high‑power combined test systems
• SCPI / ModBus RTU protocol compliant, EA Power Control software and LabView driver available; optional IF‑AB plug‑in modules: CANopen, ProfiNet, EtherCAT, RS232, ModBus‑TCP etc.
• Complies with EN 61010‑1 safety standard, IP20 ingress rating; supports SEMI F47 voltage‑sag compliance for semiconductor‑grade test environments.