EA‑PS 10500‑10 2U | 500V 10A 1500W Auto‑Ranging 19" 2U Rack‑Mount Programmable DC Power Supply

The EA‑PS 10500‑10 2U belongs to EA‑PS 10000 2U series manufactured by German EA Elektro‑Automatik, distributed by TPS. As high‑performance alternative to ametek/amtek test power supplies. This high‑voltage rack‑mount digital power source with touch‑screen and USB remote control fits laboratory R&D, industrial ATE systems, high‑voltage battery simulation, power‑component validation and 24V DUT performance testing.

Core Specifications: DC output range 0‑500V, 0‑10A, rated 1500W (derates to 1200W under 110‑127V AC mains), peak efficiency up to 95%. CV ripple:40 mV rms (300 kHz BW), 500 mV pp (20 MHz BW). Measurement accuracy: voltage ≤0.05% FS, current ≤0.1% FS, power ≤0.3% FS. Supports CV / CC / CP / CR four regulation modes, resistance adjustment range:2 Ω‑3000 Ω, output capacity 120 μF. Galvanically‑isolated analog interface with selectable 0‑5V / 0‑10V remote programming. Wide‑range 90‑264V single‑phase AC input with active PFC, compact 19‑inch 2U rack housing, temperature‑controlled front‑to‑rear forced‑air cooling.

Key Features

• EA‑PS 10500‑10 2U, 500V 10A 1500W auto‑ranging programmable DC power supply, PN:06230944
• 19‑inch 2U rack‑mount enclosure, dimension 482.6×88.4×559mm, weight approx.9.5kg
• Active PFC(PF＞0.99), true voltage‑current‑power auto‑ranging delivering full‑power across wide operating envelope
• Four regulation modes: Constant Voltage(CV), Constant Current(CC), Constant Power(CP), Constant Resistance(CR) for battery‑emulation test scenarios
• 5‑inch capacitive Gorilla‑Glass TFT touch‑screen HMI, dual push‑rotary knobs; front‑panel USB‑Host for CSV data logging, save / load user test profiles
• Multiple remote control options: galvanically‑isolated analog(0‑5V/0‑10V), rear USB‑B and Ethernet for instrument remote programming
• Comprehensive multi‑level safety protections: OVP, OCP, OPP, OT, Power‑Fail, Share‑Bus‑Fail with automatic DC‑output shutdown upon alarm trigger
• Remote‑sense terminals for DC cable IR‑drop compensation; built‑in Share‑Bus and Master‑Slave bus interfaces
• Master‑Slave / Share‑Bus parallel‑operation support, expandable up to 64 compatible‑series units for scalable high‑power combined test systems
• SCPI / ModBus RTU protocol compliant, EA Power Control software and LabView driver available; optional IF‑AB plug‑in modules: CANopen, ProfiNet, EtherCAT, RS232, ModBus‑TCP etc.
• Complies with EN 61010‑1 safety standard, IP20 ingress rating; supports SEMI F47 voltage‑sag compliance for semiconductor‑grade test environments.