EA‑PS 10360‑15 2U | 360V 15A 1500W Auto‑Ranging 19" 2U Rack‑Mount Programmable DC Power Supply

The EA‑PS 10360‑15 2U is part of EA‑PS 10000 2U series manufactured by German EA Elektro‑Automatik, distributed by TPS. As premium alternative to ametek/amtek test power supplies, this digital touch‑screen rack‑mount source supports USB, Ethernet and analog control. It is widely used in laboratory R&D, industrial test benches, battery charging and high‑voltage component validation including 24V DUT performance testing.

Core Specifications: DC output range 0‑360V, 0‑15A, rated 1500W (derates to 1200W under 110‑127V AC mains), peak efficiency up to 94.5%. CV ripple:30 mV rms (300 kHz BW), 300 mV pp (20 MHz BW). Measurement accuracy: voltage ≤0.05% FS, current ≤0.1% FS, power ≤0.3% FS. CV / CC / CP / CR four regulation modes, resistance adjustment range:0.8 Ω‑1600 Ω, output capacity 330 μF. Galvanically‑isolated analog interface with selectable 0‑5V / 0‑10V remote programming. Wide‑range 90‑264V single‑phase AC input with active PFC, compact 19‑inch 2U rack housing, temperature‑controlled front‑to‑rear forced‑air cooling.

Key Features

• EA‑PS 10360‑15 2U, 360V 15A 1500W auto‑ranging programmable DC power supply, PN:06230943
• 19‑inch 2U rack‑mount enclosure, dimension 482.6×88.4×559mm, weight approx.9.5kg
• Active PFC(PF＞0.99), true voltage‑current‑power auto‑ranging delivering full‑power within broad operating envelope
• Four regulation modes: Constant Voltage(CV), Constant Current(CC), Constant Power(CP), Constant Resistance(CR) for battery‑simulation test scenarios
• 5‑inch capacitive Gorilla‑Glass TFT touch‑screen HMI, dual push‑rotary knobs; front‑panel USB‑Host for CSV data logging, save / load user test profiles
• Multi‑control capability: galvanically‑isolated analog(0‑5V/0‑10V), rear USB‑B and Ethernet for remote instrument control
• Comprehensive multi‑level safety protections: OVP, OCP, OPP, OT, Power‑Fail, Share‑Bus‑Fail with automatic DC‑output shutdown upon alarm trigger
• Remote‑sense terminals for DC cable IR‑drop compensation; built‑in Share‑Bus and Master‑Slave bus interfaces
• Master‑Slave / Share‑Bus parallel‑operation support, expandable up to 64 compatible‑series units for scalable high‑power combined test systems
• SCPI / ModBus RTU protocol compliant, EA Power Control software and LabView driver available; optional IF‑AB plug‑in modules: CANopen, ProfiNet, EtherCAT, RS232, ModBus‑TCP etc.
• Complies with EN 61010‑1 safety standard, IP20 ingress rating; supports SEMI F47 voltage‑sag compliance for semiconductor‑grade test environments.