EA‑PS 10060‑120 2U | 60V 120A 3000W High‑Current Auto‑Ranging 19" 2U Rack‑Mount Programmable DC Power Supply

The EA‑PS 10060‑120 2U belongs to EA‑PS 10000 2U series from German EA Elektro‑Automatik, distributed by TPS. It is a high‑current precision programmable DC power source as alternative to ametek/amtek test instruments. Suited for laboratory R&D, industrial ATE test systems, high‑current battery charging, 24V power‑supply validation, component and power‑device characterization.

Core Specifications: DC output range 0‑60V, 0‑120A, rated 3000W (derates to 1500W under 110‑127V AC mains), maximum efficiency up to 94%. CV ripple:10 mV rms (300 kHz BW), 100 mV pp (20 MHz BW). Measurement accuracy: voltage ≤0.05% FS, current ≤0.1% FS, power ≤0.3% FS. Supports CV / CC / CP / CR four regulation modes, resistance adjustment range:0.02 Ω‑24 Ω, output capacity 17280 μF. Wide‑range 90‑264V single‑phase AC input with active PFC, 19‑inch compact 2U rack housing, temperature‑controlled front‑to‑rear forced air cooling.

Key Features

• EA‑PS 10060‑120 2U, 60V 120A 3000W high‑current programmable DC power supply, PN:06230946
• 19‑inch 2U rack‑mount enclosure, dimension 482.6×88.4×559mm, weight approx.12.7kg
• Active PFC(PF＞0.99), auto‑ranging power characteristic for flexible voltage‑current combinations within full‑power envelope
• Four operating modes: Constant Voltage(CV), Constant Current(CC), Constant Power(CP), Constant Resistance(CR) for battery‑simulation test scenarios
• 5‑inch capacitive Gorilla‑Glass TFT touch‑screen, dual push‑rotary knobs; front‑panel USB‑Host for CSV data logging, saving & loading user test profiles
• Comprehensive multi‑level safety protections: OVP, OCP, OPP, OT, Power‑Fail, Share‑Bus‑Fail with automatic DC‑output shutdown upon alarm trigger
• Remote‑sense terminals for DC cable IR‑drop compensation; galvanically‑isolated 15‑pin analog, rear USB‑B & Ethernet onboard communication interfaces
• Master‑Slave / Share‑Bus parallel‑operation support, expandable up to 64 identical‑series units for scalable high‑power combined test systems
• SCPI / ModBus RTU protocol compliant, EA Power Control software and LabView driver available; optional IF‑AB plug‑in modules: CANopen, ProfiNet, EtherCAT, RS232, ModBus‑TCP etc.
• Complies with EN 61010‑1 safety standard, IP20 ingress protection for laboratory and industrial test environments; supports SEMI F47 voltage‑sag compliance feature.